Accessories
Drawers
Rack mount drawers
The 19" lockable rack mount drawers are front mounted in rack enclosures or network rack cases. They are designed to house any kind of valuable equipment and keep it safe.
Also known as rack mount enclosures, they come in a range of sizes (heights from 2u to 4u) in either black or grey. The drawers run on full extension ball-bearings for smooth operation when loaded.
Recessed / Extender Brackets
Recessed / Extender Brackets for Network Racks
Both the 1u and 2u recessed - extender standoff brackets come in 50mm, 100mm and 150mm depths.
These rack panel recess brackets allow standard 19 inch panels to be recessed within a rack or extended out without the need to replace the mounting ears.
Manufactured in 1.5mm steel and powder coated in fine textured black, they are supplied as a set of two.
DIN Rail Panels
19 inch rack mount DIN rail panel brackets and chassis panels to suit 1U, 3U, 5U and 8U are all manufactured in 1.5mm steel. All are powder coated in fine Tex Black with cable access to sides and/or rear and cable tie holes across the width. The 1U panel bracket comes with a 3U removable cover plate to cover switches and the chassis panels are fitted with cable trunking to give a cable tidy look when complete. DIN rails can be replaced with any other style of rail.
Blanking Panels
Blanking Panels
Rackmount blanking plates, rack blank panels are used to blank off unused sections of 19 inch server or data racks to give a tidy appearance and maintain rack-cooling airflow.
Available in ½U, 1U, 2U, 3U, 4U and 6U, they are manufactured in 1.2mm steel with the upper and lower edges formed with a 10mm flange. The blanking panels are powder coated in fine textured high quality paint, and you can select between black, light grey and dark grey.
Vented Perforated Blanking Panels
Full Range of Vented Perforated Panels
Perforated blanking plates
Rack mount vented perforated blanking panel with perforations in the main area to allow for extra ventilation, and comes in a high quality black texture finish.
Vented Slotted Blanking Panels
Full Range Of Vented Blanking Panels
Vented Slotted Blanking Panels
Vented blanking plates
Vented blanking panels are installed in server racks both for asthetics and for maintaining proper airflow. These panels are used to let more air in.
Chassis Enclosures
Wall mount network equipment enclosures (Chassis Enclosures)
19 inch rack mount network equipment enclosures. Blank panel in the front and removable back/rear panel for cable access. Made from 1.2mm steel and finished in fine tex black.
Rack Strips
Various size 19" rack strips.
-Ranges fom 1U to 20U
19" Rack Strips
Rack rails or rack strips are used to mount rack-able electronic hardware and rack mount accessories within a 19" rack. A minimum of two rails are required to mount equipment with the height being determined by the number of rack units needing to be mounted.
Punched panels
Punched panel to suit XLR 'D' Series Holes for network cabinets & racks
1U Rack XLR Panel, Punched for 4, 8 and 16 x Neutrik D-Series Connectors XLR. Black Powder Coated
Sliding Multi-Purpose Shelf
Ideal for Printers/ Computers/ DVD/ Audio Video Equipment or any other type of use where access is needed to top or rear of equipment
